Scion 2008 tC User Manual download pdf

Intake Kit Installation Instructions: 2007-2008 Scion tC L4-2.4L Stage 2

Complete Stock Intake.

Disconnect battery before install.

Step 1

Loosen the two 10mm nuts holding engine cover and

remove cover.

Step 6

Loosen bolt holding in brake fluid reservoir. Install hous-

ing and position (see step 12).

Step 11

Disconnect MAF sensor harness.

Step 2

A) Pull back crankcase line from intake tube. B) With

pliers, remove factory band clamp on Throttle Body.

Pull tube away from Throttle Body.

Step 7

Re-install bolt and tighten tab on housing from step 11.

With screw and washer provided, tighten bottom of hous-

ing with 10mm socket or wrench.

Step 12

Loosen clamp on air box with 10mm socket or wrench.

Step 3

Pull back VSV valve away from intake tube.

Step 8

Unclip the side of air box. Remove upper half of air box.

Remove air filter.

Step 4

Remove stock intake tube out of vehicle.

Step 9

Loosen the 3 bolts holding in bottom of air box with 10mm

socket or wrench and remove.

Step 5

Attach trim seal to housing.

Step 10

advanced FLOW engineering™

P.O. Box 1719

Corona, CA 92878

Support: 951-493-7100

aFepower.com

Complete Kit w/ Parts

Kit P/N:

51/54-11562

Make: Scion

Model:

Year: Engine:

tC 2007-2008 L4-2.4L

ools Required:

5/16” nut driver

Flat head screwdriver

Phillips screwdriver

10mm socket or wrench

Ratchet w/extension

Pliers

Parts List:

1 Air filter (

Pro-55R

™ 24-40505 or

Pro

Dry

™ 21-40505)

1 Intake tube, MAS (05-00997)

1 Intake tube, TB (05-00808)

1 Housing

2 Screw, slotted M4x7x8

1 Screw Hex Head M6x1x20

1 Flat washer M6

1 3/4” trim seal @ 24.5”L

1 Coupler, Reducer (05-00649)

1 Coupler, Straight (05-00418)

1 Coupler, Straight (05-00417)

1 Clamp #064

5 Clamp #044

™

Install coupler (05-00417) to Throttle Body with clamps

provided. Tighten clamp on Throttle Body only.

Step 13

Install Throttle Body Tube (05-00808) tube along with

coupler (05-00418) and clamps. Do not tighten.

Step 14

Install MAF tube (05-00997) with coupler (05-00649) and

clamps on housing side. Position all tubes and tighten

clamps using 5/16” nut driver.

Turn page over and continue to page 2

Step 15

06-880258

Pg.1

Last

update:

08-22008

(05-00808)

(05-00997)

1 2

Summary of Contents

Page 1 - 51/54-11562

Intake Kit Installation Instructions: 2007-2008 Scion tC L4-2.4L Stage 2Complete Stock Intake. Disconnect battery before install.Step 1Loosen the two

Page 2 - 21-40505

Intake Kit Installation Instructions: 2007-2008 Scion tC L4-2.4L Stage 2With phillips screwdriver, loosen and remove MAF sensor from stock air box.Ste

Scion 2008 tC User Manual

Browse online or download User Manual for Telephones Scion 2008 tC. New scion tC pg1.qxp - Advanced FLOW Engineering

Summary of Contents

More documents for Telephones Scion 2008 tC

Comments to this Manuals

Scion 2008 tC User Manual

Browse online or download User Manual for Telephones Scion 2008 tC. New scion tC pg1.qxp - Advanced FLOW Engineering

Summary of Contents

More documents for Telephones Scion 2008 tC

Comments to this Manuals

Related products and manuals for Telephones Scion 2008 tC