Scion 2007 tC Owner's Manual Page 15

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 14
SCION tC 2007 - SECURITY (V5)
Procedure
Page 15 of 28 pages
Issue: B 02/27/06
(m) Insert the terminal at the end of the vehicle
harness’ VIOLET wire into empty 2P
connector’s left side opening. (Fig. 4-9)
(n) Insert the terminal at the end of the vehicle
harness’ ORANGE wire into the empty 2P
connector’s right side opening. (Fig. 4-9)
(1) Turn the connector so the wires face you
and the tab is on top.
(2) Verify the correct wire is chosen.
(3) Verify the terminal is inserted and seated
properly.
(4) The terminal should not come out when
pulled lightly from the back. If it does,
push it in again until securely seated.
(o) Close the retainer. (Fig. 4-9)
(p) Using a small jeweler’s screwdriver, lift the
center terminal retainer on the 30P
connector. Then insert the terminal at the end
of the V5 harness’ YELLOW wire into the
bottom row, seventh space from the left of
the vehicle harness’ 30P connector. (Fig. 4-
10)
(1) Verify the correct wire is chosen.
(2) Verify the terminal is inserted and seated
properly.
(3) The terminal should not come out when
pulled lightly from the back. If it does,
push it in again until securely seated.
(q) Close the center terminal retainer of the 30P
connector. (Fig. 4-10)
Fig. 4-9
Vehicle Harness’
VIOLET Wire
Terminal
Vehicle Harness’
ORANGE Wire
Terminal
Wire Side View
VIOLET
ORANGE
2P
2P (Female)
Retainer
Fig. 4-10
Jeweler’s Screwdriver
Wire Side View
YELLOW
30P
Retainer
V5 Harness’
YELLOW Wire
Terminal
30P
V5 Harness
Page view 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Comments to this Manuals

No comments