Scion 2007 tC Owner's Manual download pdf (Page 2)

SCION tC 2007 - SECURITY (V5)

Procedure

Page 2 of 28 pages

Issue: B 02/27/06

Care must be taken when installing this accessory to ensure damage does not occur to the vehicle. The installation of this

accessory should follow approved guidelines to ensure a quality installation.

These guidelines can be found in the "Accessory Installation Practices" document.

This document covers such items as:-

• Vehicle Protection (use of covers and blankets, cleaning chemicals, etc.).

• Safety (eye protection, rechecking torque procedure, etc.).

• Vehicle Disassembly/Reassembly (panel removal, part storage, etc.).

• Electrical Component Disassembly/Reassembly (battery disconnection, connector removal, etc.).

Please see your Toyota dealer for a copy of this document.

1. Vehicle Disassembly.

(a) Take note of the battery cable installation

position, as this will need to be re-installed in

the same position after installation

completion.

(b) Remove the negative battery cable.

(Fig. 1-1)

(1) For vehicles equipped with automatic

transmission, place the shifter in the N

(neutral) position and set the parking

brake prior to disconnecting the battery.

(2) Do not touch the positive terminal with

any tool when removing cable.

(d) Remove the driver’s cowl cover. (Fig. 1-3)

(1) Remove the one nut securing the cowl

cover.

Fig. 1-3

ylon Panel Removal Tool

Cowl Cover

Nut

Fig. 1-2

ylon Panel Removal Tool

Step Cover

Fig. 1-1

10 mm Wrench

Negative Battery Cable

Battery

1 2 3 4 5 6 7 ... 27 28

No comments

Scion 2007 tC Owner's Manual Page 2