SCION tC 2007 - SECURITY (V5)
Procedure
Page 18 of 28 pages
Issue: B 02/27/06
(d) Secure the V5 harness to the vehicle harness
with three wire ties in the driver side center
console area. (Fig. 6-3)
(1) Do not secure the V5 harness to the 10P
and 6P connectors’ harness with a wire
tie.
(e) Route the V5 harness toward the glove box
area, then secure it to the vehicle harness
with two wire ties in the passenger side
center console area. (Fig. 6-4)
7. V5 Wire Harness Installation.
(Passenger Side Area)
(a) Route the V5 harness to the glove box area,
then secure it to the vehicle harness with five
wire ties. (Fig. 7-1)
(b) Route the V5 harness through the glove box
area, then secure it to the vehicle harness
with three wire ties. (Fig. 7-2)
Side Cutte
Wire Ties
x2
V5 Harness
Fig. 6-4
Fig. 6-3
V5 Harness
Side Cutte
Wire Ties
x3
Fig. 7-1
Side Cutter
V5 Harness
Wire Ties (x5)
Fig. 7-2
V5 Harness
Wire Ties (x3)
Side Cutter
Comments to this Manuals