Scion 2007 tC Owner's Manual download pdf (Page 6)

SCION tC 2007 - SECURITY (V5)

Procedure

Page 6 of 28 pages

Issue: B 02/27/06

2. V5 Wire Harness Installation.

(Steering Column Area)

(a) Locate and disconnect the white 8P

connector from the ignition switch area.

(Fig. 2-1)

(b) Plug in the V5 harness’ white 8P connectors

between the vehicle harness’ 8P connector

and the ignition switch. (Fig. 2-2)

(1) Verify the connectors are plugged in

securely.

(c) Secure the V5 harness to the vehicle harness

with one wire tie. (Fig. 2-3)

(1) Ensure the wire tie is secured at the

vehicle clamp where the harnesses meet.

(d) Secure the 8P connectors (vehicle and V5

harness) to the V5 harness with one large

wire tie on the right side of the steering

column. (Fig. 2-3)

Fig. 2-1

8P (White)

Fig. 2-2

V5 Harness’ 8P

V5 Harness’ 8P

Vehicle Harness’ 8P

V5 Harness’

BLACK Wire

V5 Harness

Vehicle Clamp

Side Cutter

Steering Column

V5 Harness

8P

Wire Tie

8P

Fig. 2-3

Wire Tie

White Tape

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Comments to this Manuals

No comments