SCION tC 2007 SUPERCHARGER
Procedure
Page 14 of 36
Issue A: 04/10/07
5. OE Wiring Disconnect.
(a)
Using a small flat blade tool, remove the
plastic retainer clip from the wire harness on
the alternator. Fig. 38.
(b)
Remove the metal alternator bracket using a
10mm socket as seen in Fig 39. This bracket
will NOT be reused. Save the bolt as it will be
used later.
(c)
Disconnect Plastic Crank Position Sensor
Connector from metal retainer bracket (White
Arrow) and also remove metal retainer bracket
from engine (Black Arrow). 10mm wrench.
See Fig 40. This bracket will NOT be reused.
(d)
Disconnect Crank Position Sensor (CPS)
Wiring Connector. Fig. 41.
Fi
. 39
Remove
Fi
. 41
Remove
10 mm wrench
Fi
. 40
Fi
. 38
Comments to this Manuals