Scion 2007 tC User Manual download pdf (Page 21)

SCION tC 2007 SUPERCHARGER

Procedure

Page 21 of 36

Issue A: 04/10/07

(j)

Remove two OE transmission bell-housing

bolts (17 mm wrench) as shown in Figure 63.

These will NOT be re-used.

(k)

Replace OE heat shield with TRD provided

pre-bent heat shield. See Fig 64. You will

need to remove 4 bolts,

CAUTION: The sheet

metal heat shield has many sharp edges! Care

should be taken when handling to avoid getting

cut.

(l)

After all of the fasteners are removed, carefully

remove the OE heat shield.

(m)

Now install the TRD supplied heat shield.

Secure heat shield with the 4 O.E. bolts

Torque to 9 ft-lbs.

(n)

Reconnect the AFR sensor wire connector and

secure wires to radiator hose with OE wire

clip. See Fig 65.

(o)

Utilize TRD transmission mounting bracket to

attach supercharger assembly to engine block

and bell housing. Fig. 66.

(p)

Set supercharger assembly onto engine.

. 64

. 63

Remove these

2 Fasteners

17 m

. 65

. 66

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 35 36

No comments

Scion 2007 tC User Manual Page 21