SCION tC 2007 SUPERCHARGER
Procedure
Page 27 of 36
Issue A: 04/10/07
12. Intake System.
(a) Install rubber TRD intake tube between S/C
and Throttle Body. Be sure to install the hose
clamps over the tube before fitting into place.
Fig. 93.
(b)
Attach angled bypass hard line into discharge
hose. Press in until tube is even with the inside
diameter of the discharge chose.
(c)
Attach bypass valve to intake tube with the 90
degree tube and 2 ½ in rubber hose with the
appropriate hose clamp.
(d)
Orient hose clamps as shown in Figure 94.
(e)
Cut OE vacuum line near throttle body and
insert TRD-provided plastic T fitting and
TRD-provided vacuum hose. See Fig 95.
(f)
Connect other end of TRD-provided vacuum
hose to nipple on end of bypass valve. Fig. 96.
Fi
. 93
Fi
. 96
Fi
. 95
Fi
. 94
Comments to this Manuals