Scion 2007 tC User Manual download pdf (Page 19)

SCION tC 2007 SUPERCHARGER

Procedure

Page 19 of 36

Issue A: 04/10/07

9. Mechanical

(a) Rotate radio noise suppressor up at

approximately a 45 degree angle. Fig. 55.

(b)

Unplug oil pressure switch. Remove OE oil

pressure sending unit. Use a deep 24 mm (or

15/16”) socket to remove. Fig. 56.

(c)

Place a small amount of Teflon paste onto

threads and Insert TRD hexagonal T fitting.

(Torque to 11-ft-lbs). NOTE: The female

threads need to be pointing upwards within

about +/- 10 degrees from the 12 O’Clock

position. You will need a

7/8 inch (22mm)

combination wrench.

(d)

Place a small amount of Teflon paste onto

threads and Thread in OE Oil Pressure Switch

into the top of TRD hexagonal T fitting.

(

Torque to 11-ft-lbs). Reconnect electrical

connector. Fig. 58. Be sure that the wires are

in a relaxed, strain-free position.

(e)

Apply a small amount of motor oil onto the

male pipe threads of the TRD Supercharger Oil

Feed Line An Fitting. Do not use Teflon tape

on AN fittings.

. 56

24mm socke

7/8” wrench

. 57

. 58

. 55

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

No comments

Scion 2007 tC User Manual Page 19