Scion 2007 tC User Manual download pdf (Page 20)

SCION tC 2007 SUPERCHARGER

Procedure

Page 20 of 36

Issue A: 04/10/07

(f)

Remove supercharger assembly from

packaging and place onto a workbench. Apply

a small amount of Teflon paste to the fitting

threads. Attach TRD Supercharger Oil Feed

Line Fitting to Supercharger using a 1/2” box

wrench. Fig. 59. NOTE: Use a second

wrench to hold the supercharger fitting in place

as you tighten the TRD fitting into it.

(g)

Remove alternator pivot bolt indicated by the

wrench in Figure 61.

(h)

Temporarily remove clutch slave cylinder bolts

to gain access to transmission bell housing

bolts and for clearance to install TRD bolts as

well. Carefully secure slave cylinder assembly

out of way until re-assembly later on. Fig. 62

(Manual Transmission Only)

(i) Remove transmission dip stick from

transmission using 10 mm wrench. For

clearance to install TRD bolts and supercharger

rear bracket.

(Automatic Transmission

Only)

The dipstick tube will be replaced with

TRD supplied tube.

. 61

14 m

1/2” wrench

. 59

. 62

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

No comments

Scion 2007 tC User Manual Page 20